SnapSlicer — Image to Cut File Converter (SVG, DXF, G-code)

1 Material

Your sheet shows on the bed to scale — every piece and cut is measured in real mm against it.

2 Add

Shapes

Click a shape to drop it on the bed — or use the magnifier to search thousands more.

Object
Cut out = the shape is cut from the sheet · Keep = the shape is a piece you keep; Cut-outs on top of it punch holes through it.
50%
How much of the image is traced into cut lines.
0°

3 Tune

None — the machine only cuts your shapes. Rectangle / Circle adds one extra outer cut (the gold line) so the whole piece drops free of the sheet.
2
Med
sm

Cut lines hug the design tighter with higher Detail and lower Smooth — details finer than ~2 mm need Smooth at 0.

Advanced separate by color
4
For multi-colored art: each color becomes its own labeled layer in the SVG/DXF.

4 Export

Add something to see it on the bed to scale.
SVG
WAZER WAM
DXF
CAD / WAM
G-code
laser / CNC

WAZER: export SVG or DXF for WAM. G-code is validated automatically before download.

Machine & export settings
G-code paths get offset by half of this so pieces come out the designed size (outers grow, holes shrink). Leave 0 for WAZER — WAM applies its own kerf. SVG / DXF always export at design size.

GRBL machines store nothing onboard — the file supplies everything, so homing, work offsets, or air-assist lines go here (Klipper users can call their own macros). Units, absolute mode, and beam/spindle shutdown are always included automatically, so leaving these empty is safe.

Cut & Edit
keep cut outline
Start your design

Set your material sheet on the left, then upload an image, add text, or drop a shape. Drag to move, corners to resize, top handle to rotate — sizes show in real mm. Red lines are where it cuts.

0%